Web Development (CGI Library)¶

In this chapter we will learn about developing Web applications using a CGI Library written in the Ring language.

Configure the Apache web server¶

In this section we will learn about using Ring with the Apache HTTP Server. We can also use Ring with any web server that supports CGI.

Note

If you are developing your application using Ring Notepad then there’s no need to configure Apache manually.

Using XAMPP Apache web server¶

Here we will use the XAMPP application that has Apache web server already been included. You can download XAMPP package from this link

XAMPP : https://www.apachefriends.org/download.html

Install then open the configuration file from the XAMPP application or search for it in the following locations based on your operating system.

For Windows:

xampp\apache\conf\httpd.conf

For Linux:

/opt/lampp/etc/httpd.conf

For macOS:

/Applications/XAMPP/xamppfiles/etc/httpd.conf

Search for the next line and make sure that it’s not commented

LoadModule cgi_module modules/mod_cgi.so

Search for : AddHandler cgi-script

Then add “.ring” to the supported cgi extensions

Example

AddHandler cgi-script .cgi .ring

Example

AddHandler cgi-script .cgi .pl .asp .ring

Restart/Start the server using XAMPP “Manage Servers” or “Services” section

Create your web applications in a directory supported by the web server.

For Windows:

xampp\htdocs\mywebapplicationfolder

For Linux:

/opt/lampp/htdocs/mywebapplicationfolder

For macOS:

Open XAMPP application then go to "Volumes" section

Mount the "/opt/lampp" volume

Open Finder then you will find it mounted as an IP address under "Locations" on the left menu

Setting the shebang line¶

For Ring files to run properly under CGI we need to set the shebang line to locate the executable file of Ring. So, Inside the source code file (*.ring), Add next line as the very first line in the file:

For Windows:

#!ring -cgi

For Linux:

#!/usr/bin/ring -cgi

For macOS:

#!/usr/local/bin/ring -cgi

Note

Change the previous line based on the path to ring executable in your machine

Grant Ring files execution permission¶

In Linux and Mac operating systems ring files cannot be run properly using CGI until we grant them executable permission. You can do that using the properties section of your preferred File manager or you can do it using Terminal as follow:

sudo chmod +x ringAppFile.ring

Note

If you are developing your application using Ring Notepad then this step will be done automatically.

Ring CGI Hello World Program¶

The next program is the Hello World program

For Windows:

#!ring -cgi

See "content-type: text/html" +nl+nl+
    "Hello World!" + nl

For Linux:

#!/usr/bin/ring -cgi

See "content-type: text/html" +nl+nl+
    "Hello World!" + nl

For macOS:

#!/usr/local/bin/ring -cgi

See "content-type: text/html" +nl+nl+
    "Hello World!" + nl

Hello World Program using the Web Library¶

We can use the web library to write CGI Web applications quickly

Example (1) :

#!ring -cgi

Load "weblib.ring"

Import System.Web

New Page
{
        Text("Hello World!")
}

Example (2) :

#!ring -cgi

Load "weblib.ring"

Import System.Web

WebPage()
{
        Text("Hello World!")
}

Tip

the difference between ex. 1 and ex. 2 is using WebPage() function to return the page object instead of creating the object using new statement.

Web Library Features¶

The next features are provided by the Web library to quickly create web applications.

Generate HTML pages using functions
Generate HTML pages using objects
HTTP Get
HTTP Post
Files Upload
URL Encode
Templates
CRUD MVC Sample
Users Logic & Registration Sample

HTTP Get Example¶

The Page User Interface

#!ring -cgi
Load "weblib.ring"
Import System.Web
New Page
{
  Title = "Test HTTP Get"
  divstart([ :style = StyleSizeFull() ] )
  boxstart()
        text( "Test HTTP GET" )
        newline()
  boxend()
  divstart([ :style = Styledivcenter("600px","550px") +
                      StyleGradient(21) ])
  divstart([:style = stylefloatleft() + stylesize("100px","100%") +
                     stylecolor("black") + stylegradient(58)])
  formstart("ex5.ring")
        tablestart([ :style = stylesize("65%","90%") +
                              stylemarginleft("35%") +
                              stylemargintop("30%") ])
          rowstart([])
                cellstart([])
                  text ( "Name : "  )
                cellend()
                cellstart([])
                  cTextboxStyle = StyleMarginLeft("5%") +
                                  StyleWidth("250px") +
                                  StyleColor("black") +
                                  StyleBackColor("white")
                  textbox([ :name = "Name", :style = cTextboxStyle ] )
                cellend()
          rowend()
          rowstart([])
                cellstart([])
                  text ( "Address : " )
                cellend()
                cellstart([])
                  textbox([ :name = "Address", :style = cTextboxStyle] )
                cellend()
          rowend()
          rowstart([])
                cellstart([])
                  text ( "Phone : " )
                cellend()
                cellstart([])
                  textbox([ :name = "Phone", :style = cTextboxStyle ])
                cellend()
          rowend()
          rowstart([])
                cellstart([])
                  text ( "Age : "  )
                cellend()
                cellstart([])
                  textbox([ :name = "Age", :style = cTextboxStyle ])
                cellend()
          rowend()
          rowstart([])
                cellstart([])
                  text ( "City: " )
                cellend()
                cellstart([])
                  listbox([ :name = "City", :items = ["Cairo","Riyadh","Jeddah"],
                         :style = stylemarginleft("5%") + stylewidth("400px") ] )
                cellend()
          rowend()
          rowstart([])
                cellstart([])
                  text ( "Country : " )
                cellend()
                cellstart([])
                  combobox([ :name = "Country",
                         :items = ["Egypt","Saudi Arabia","USA"],
                         :style = stylemarginleft("5%") +
                                  stylewidth("400px")+
                                  stylecolor("black")+
                                  stylebackcolor("white")+
                                  stylefontsize("14px") ])
                cellend()
          rowend()
          rowstart([])
                cellstart([])
                  text ( "Note : " )
                cellend()
                cellstart([])
                  editbox([ :name = "Notes",
                        :style = stylemarginleft("5%") +
                                 stylesize("400px","100px")+
                                 stylecolor("black")+
                                 stylebackcolor("white") ,
                        :value = "write comments here..." ] )
                cellend()
          rowend()
          rowstart([])
                cellstart([])
                cellend()
                cellstart([])
                  submit([ :value = "Send" , :Style = stylemarginleft("5%") ])
                cellend()
          rowend()
        tableend()
  formend()
  divend()
  divend()
  divend()
}

Screen Shot:

The Response

#!ring -cgi
Load "weblib.ring"
Import System.Web
New Page
{
 divstart([ :style = styledivcenter("800px","500px") ])
  boxstart()
        text ( "HTTP GET Response" )  newline()
  boxend()
  divstart([ :style = stylefloatleft()+stylewidth("10%")+
                      stylecolor("black")+stylegradient(58) ])
        newline()
        text ( "Name : "   )
        newline() newline()
        text ( "Address : "  )
        newline() newline()
        text ( "Phone : "   )
        newline() newline()
        text ( "Age : "   )
        newline() newline()
        text ( "City : "   )
        newline() newline()
        text ( "Country : "   )
        newline() newline()
        text ( "Note : "   )
        newline() newline()
  divend()
  divstart([ :style = stylefloatleft()+stylewidth("90%")+
                      stylecolor("black")+stylegradient(47) ])
        divstart([ :style = stylefloatleft() + stylewidth("1%") ])
          newline()
        divend()
        divstart([ :style = stylefloatleft() + stylewidth("95%") ])
          newline()
          text ( aPageVars["Name"] )
          newline() newline()
          text ( aPageVars["Address"] )
          newline() newline()
          text ( aPageVars["Phone"] )
          newline() newline()
          text (  aPageVars["Age"] )
          newline() newline()
          text ( aPageVars["City"] )
          newline() newline()
          text (aPageVars["Country"] )
          newline() newline()
          text ( aPageVars["Notes"] )
          newline() newline()
        divend()
  divend()
 divend()
}

Screen Shot:

HTTP POST Example¶

The Page User Interface

#!ring -cgi
Load "weblib.ring"
Import System.Web
New Page
{
        boxstart()
                text( "Post Test")
                newline()
        boxend()
        divstart([ :style=StyleFloatLeft()+StyleWidth("100px") ])
                newline()
                text( "Number1 : " )    newline() newline()
                text( "Number2 : " )    newline() newline()
        divend()
        formpost("ex7.ring")
                divstart([ :style = styleFloatLeft()+StyleWidth("200px") ])
                        newline()
                        textbox([ :name = "Number1" ])  newline() newline()
                        textbox([ :name = "Number2" ])  newline() newline()
                        submit([ :value = "Send" ] )
                divend()
        formend()
}

Screen Shot:

The Response

#!ring -cgi
Load "weblib.ring"
Import System.Web
New Page
{
        boxstart()
                text( "Post Result" )
                newline()
        boxend()
        divstart([ :style = styleFloatLeft()+styleWidth("200px") ])
                newline()
                text( "Number1 : " + aPageVars["Number1"] )
                newline() newline()
                text( "Number2 : " + aPageVars["Number2"] )
                newline() newline()
                text( "Sum : " + (0 + aPageVars["Number1"] + aPageVars["Number2"] ) )
                newline()
        divend()
}

Screen Shot:

Upload Files¶

The Page User Interface

#!ring -cgi
Load "weblib.ring"
Import System.Web
New page
{
        boxstart()
                text( "Upload File" )
                newline()
        boxend()
        for x = 1 to 3 newline() next
        formupload("ex9.ring")
                text( "Customer Name : " )
                textbox([ :name = "custname" ])
                newline() newline()
                divstart([ :style = styleFloatLeft() + styleWidth("90px") ])
                        uploadfile("file")  newline() newline()
                        uploadfile("file2") newline() newline()
                        submit([ :value = "Send" ])
                divend()
        formend()
}

Screen Shot:

The Response

#!ring -cgi
Load "weblib.ring"
Import System.Web

cUploadPath = "C:/Apache2.2/htdocs/ringapp/upload/"
cUploadFolder = "/ringapp/upload/"

New page
{
        boxstart()
                text( "Upload Result" )
                newline()
        boxend()
        newline()
        divstart([ :style=  styleFloatLeft() + styleWidth("100px") ])
                text( "Name : " + aPageVars["custname"] )
                newline()
        divend()
        if aPageVars["file"] != char(13)
                getuploadedfile(self,"file")
        ok
        if aPageVars["file2"] != char(13)
                getuploadedfile(self,"file2")
        ok
}

Func getuploadedfile oObj,cFile
        # here we use object.property
        # instead of object { } to avoid executing braceend method
        cFileName = cUploadPath + oObj.getfilename(aPageVars,cFile)
        write(cFileName,aPageVars[cFile])
        system("chmod a+x "+cFileName)
        oObj.newline()
        oObj.text( "File "+cFileName+ " Uploaded ..." )
        oObj.newline()
        imageURL = cUploadFolder + oObj.getfilename(aPageVars,cFile)
        oObj.link([ :url = imageURL, :title = "Download" ])
        oObj.newline()
        oObj.image( [ :url = imageURL , :alt = :image  ] )
        oObj.newline()

Screen Shot:

Cookies¶

The Page User Interface

#!ring -cgi
Load "weblib.ring"
Import System.Web

New page
{
        boxstart()
                text( "Cookie Test" )
                newline()
        boxend()
        newline()
        link([ :url = "ex11.ring", :title = "Use Cookies" ])
        cookie("custname","Mahmoud Fayed")
        cookie("custage",28)
}

Screen Shot:

The Response

#!ring -cgi
Load "weblib.ring"
Import System.Web

New Page
{
        boxstart()
                text( "Cookies Values" )
                newline()
        boxend()
        link([ :url = "ex10.ring", :title = "back" ])
        newline()
        divstart([:style="float:left;width:200px"])
                text( "Name : " + aPageVars["custname"] )
                newline()
                text( "Age : " + aPageVars["custage"] )
                newline()
        divend()
}

Screen Shot:

URL Encode¶

The Page User Interface

#!ring -cgi
Load "weblib.ring"
Import System.Web

New Page
{
        boxstart()
                text( "URLEncode" )
                newline()
        boxend()
        link([ :url = "ex5.ring?Name="+URLEncode("-*{Mahmoud}*-")+
                      "&Address=Egypt&Phone=123456&Age=28&Notes=Programmer",
                      :title = "Test URL Encode" ])
}

Screen Shot:

Templates¶

Using Templates we can write Ring code inside HTML files

Syntax:

<%= Ring Expression %>
<%  Ring Statements %>

The HTML Code

<h1>Listing Numbers</h1>
<table>
  <tr>
    <th> <%= myheader.cColumn1 %> </th>
    <th> <%= myheader.cColumn2 %> </th>
    <th></th>
    <th></th>
    <th></th>
  </tr>
<% for x in aNumbers %>
  <tr>
    <td> <%= x.nValue  %> </td>
    <td> <%= x.nSquare %> </td>
  </tr>
<% next %>
</table>

The Ring Code

#!ring -cgi
Load "weblib.ring"
Import System.Web

New NumbersController { start() }

Class NumbersController

        MyHeader aNumbers

        Func Start

                MyHeader = New Header
                {
                        cColumn1 = "Number" cColumn2 = "Square"
                }

                aNumbers = list(20)

                for x = 1 to len(aNumbers)
                        aNumbers[x] = new number
                        {
                                nValue  = x   nSquare = x*x
                        }
                next

                cTemp = Template("mynumbers.html",self)

                New Page
                {
                        boxstart()
                                text( "Test Templates" )
                                newline()
                        boxend()
                        html(cTemp)
                }

Class Header cColumn1 cColumn2
Class Number nValue   nSquare

Screen Shot:

HTML Special Characters¶

The text() function display HTML special characters.

If you want to write html code, use the html() function.

#!ring -cgi
Load "weblib.ring"
Import System.Web

New Page
{
        boxstart()
                text("HTML Special Characters")
                newline()
        boxend()
        text('
                <html>
                        <body>
                                <p> "hello world" </p>
                        </body>
                </html>
        ')
}

Screen Shot:

Hash Functions¶

The Page User Interface

#!ring -cgi
Load "weblib.ring"
Import System.Web

New Page
{
        boxstart()
                text( "Hash Test")
                newline()
        boxend()
        divstart([ :style = StyleFloatLeft() + StyleWidth("100px") ])
                newline()
                text( "Value : " )
                newline() newline()
        divend()
        formpost("ex16.ring")
                divstart([ :style = StyleFloatLeft() + StyleWidth("300px") ])
                        newline()
                        textbox([ :name = "Value" ])
                        newline() newline()
                        submit([ :value = "Send" ])
                divend()
        formend()
}

Screen Shot:

The Response

#!ring -cgi
Load "weblib.ring"
Import System.Web

New Page
{
        boxstart()
                text( "Hash Result" )
                newline()
        boxend()
        divstart([ :style = styleFloatLeft() + styleWidth("100%") ])
                newline()
                text( "Value : "  + aPageVars["Value"] )
                newline()
                text( "MD5 : "    + MD5(aPageVars["Value"]) )
                newline()
                text( "SHA1 : "   + SHA1(aPageVars["Value"]) )
                newline()
                text( "SHA256 : " + SHA256(aPageVars["Value"]) )
                newline()
                text( "SHA224 : " + SHA224(aPageVars["Value"]) )
                newline()
                text( "SHA384 : " + SHA384(aPageVars["Value"]) )
                newline()
                text( "SHA512 : " + SHA512(aPageVars["Value"]) )
                newline()
        divend()
}

Screen Shot:

Random Image¶

#!ring -cgi
Load "weblib.ring"
Import System.Web

cUploadPath = "C:/Apache2.2/htdocs/ringapp/upload/"

New Page
{
        boxstart()
                text( "Random Test")
                newline()
        boxend()
        divstart([ :style = styleFloatLeft() + styleWidth("400px") ])
                newline()
                aList = dir(cUploadPath)
                if len(aList) > 0
                        nIndex = random(len(aList))
                        if nindex = 0 nIndex = 1 ok
                        cItem = "upload/" + aList[nIndex][1]
                        newline()
                        image( [ :url = cItem , :alt = :image  ] )
                else
                        text("No images!") newline()
                ok
        divend()
}

Screen Shot:

HTML Lists¶

The next example print a list contains numbers from 1 to 10

Then print a list from Ring List.

Finally we have a list of buttons and when we press on a button we get a message contains the clicked button number.

To start the list we uses the ulstart() function.

To end the list we uses the ulend() function.

We uses listart() and liend() to determine the list item.

#!ring -cgi
Load "weblib.ring"
Import System.Web

Func Main
        New Page
        {
                ulstart([])
                        for x = 1 to 10
                                listart([])
                                        text(x)
                                liend()
                        next
                ulend()
                list2ul(["one","two","three","four","five"])
                ulstart([])
                        for x = 1 to 10
                                listart([])
                                        cFuncName = "btn"+x+"()"
                                        button([ :onclick = cFuncName , :value = x])
                                        script(scriptfuncalert(cFuncName,string(x)))
                                liend()
                        next
                ulend()
        }

Screen Shot:

HTML Tables¶

In this example we will learn how to generate HTML tables using the tablestart(), tableend(), rowstart(), rowend() ,headerstart(), headerend(), cellstart() and cellend() functions.

#!ring -cgi
Load "weblib.ring"
Import System.Web

Func Main
        New Page
        {
                divstart([ :style = styledivcenter("400px","500px") ] )
                        style(styletable() + styletablerows("t01"))
                        tablestart([ :id = :t01 , :style = stylewidth("100%") ])
                                rowstart([])
                                        headerstart([]) text("Number") headerend()
                                        headerstart([]) text("square") headerend()
                                rowend()
                                for x = 1 to 10
                                        rowstart([])
                                                cellstart([]) text(x)   cellend()
                                                cellstart([]) text(x*x) cellend()
                                        rowend()
                                next
                        tableend()
                divend()
        }

Screen Shot:

Gradient¶

In this example we will learn how to use the StyleGradient() function.

The function takes the style number as input (range from 1 to 60).

#!ring -cgi
Load "weblib.ring"
Import System.Web

Func Main
        New Page
        {
                boxstart()
                        text("StyleGradient() Function")
                boxend()
                for x = 1 to 60
                        divstart([ :id = x , :align = "center" ,
                                   :style = stylefloatleft() +
                                            stylesize(string(100/60*6)+"%","50px") +
                                            stylegradient(x) ])
                                h3(x)
                        divend()
                next
        }

Screen Shot:

Generating Pages using Objects¶

Instead of using functions/methods to generate HTML pages, we can use an object for each element in the page.

This choice means more beautiful code but slower.

The fastest method is to print HTML code directly, then using functions then using templates then using objects (slower).

#!ring -cgi
Load "weblib.ring"
Import System.Web

Func Main

  WebPage()
  {
        Title = "Using objects to create the Web Page content"
        h1 { text("welcome") }
        link
        {
          Title = "Google"
          Link  = "http://www.google.com"
        }
        div
        {
          id = "div1"
          style = stylegradient(30) + stylesize("50%","50%")
          text("Outer Div")
          div
          {
                id = "div2"
                color = "white"
                backgroundcolor = "green"
                width = "50%"
                height = "50%"
                marginleft = "5%"
                margintop = "5%"
                text("Inner Div")
          }
        }
        div
        {
          id = "div3"
          color = "black"
          backgroundcolor = "silver"
          width = "100%"
          height = "100%"
          text("Form")
          form
          {
                method = "POST"
                Action = "helloworld.ring"
                Table
                {
                  style = stylewidth("100%") + stylegradient(24)
                  TR
                  {
                        TD { WIDTH="10%" text("Name : " )  }
                        TD { Input { type = "text" } }
                  }
                  TR
                  {
                        TD { WIDTH="10%" text("Email : " ) }
                        TD { Input { type = "text" } }
                  }
                  TR
                  {
                        TD { WIDTH="10%" text("Password : " ) }
                        TD { Input { type = "password" } }
                  }
                  TR
                  {

                        TD { WIDTH="10%" text("Notes") }
                        TD { TextArea { width="100%" rows = 10  cols = 10
                                        text("type text here...") } }
                  }
                  TR
                  {
                        TD { WIDTH="10%" text("Gender") }
                        TD {
                          select
                           {
                                 width = "100%"
                                 option { text("Male") }
                                 option { text("Female") }
                           }
                        }
                  }
                  TR
                  {
                        TD {   WIDTH="10%" text("Role") }
                        TD
                        {
                          select
                          {
                                 multiple = "multiple"
                                 width    = "100%"
                                 option { text("student") }
                                 option { text("admin") }
                           }
                        }
                  }
                }
                Input { type = "submit" value = "send" }
                Image { src="upload/profile1.jpg" alt="profile"}
                Input { type = "checkbox" value = "Old Member"} text("old member")
                Input { type = "range" min=1 max=100}
                Input { type = "number" min=1 max=100}
                Input { type = "radio" color="black" name="one"
                        value = "one"} text("one")
          }
        }
        div
        {
          color = "white"
          backgroundcolor = "blue"
          width = "100%"
          UL
          {
                LI { TEXT("ONE") }
                LI { TEXT("TWO") }
                LI { TEXT("THREE") }
          }
        }
        div
        {
          audio
          {
                src = "horse.ogg"
                type = "audio/ogg"
          }

          video
          {
                 width = 320
                 height = 240
                 src = "movie.mp4"
                 type = "video/mp4"
          }

          Input
          {
                type = "color"
                value = "#ff0000"
                onchange = "clickColor(0, -1, -1, 5)"
          }
        }
  }

Screen Shot:

HtmlPage Class¶

Using this class we can create HTML documents without printing the output to the standard output

So instead of using the WebLib in Web Applications only

We can use it in Console/GUI/Mobile Applications too

Example:

load "stdlib.ring"
load "weblib.ring"

import System.Web

func main

        mypage = new HtmlPage {
                h1 { text("Customers Report") }
                Table
                {
                          style = stylewidth("100%") + stylegradient(4)
                          TR
                          {
                                TD { WIDTH="10%" text("Customers Count : " )  }
                                TD { text (100) }
                          }
                }

                Table
                {
                          style = stylewidth("100%") + stylegradient(26)
                          TR
                          {
                                style = stylewidth("100%") + stylegradient(24)
                                TD { text("Name " )  }
                                TD { text("Age" ) }
                                TD { text("Country" ) }
                                TD { text("Job" ) }
                                TD { text("Company" ) }
                          }
                          for x =  1 to 100
                                TR
                                {
                                        TD { text("Test" )  }
                                        TD { text("30" ) }
                                        TD { text("Egypt" ) }
                                        TD { text("Sales" ) }
                                        TD { text("Future" ) }
                                }
                          next
                }

        }

        write("report.html",mypage.output())

Using Bootstrap Library using Functions¶

The next example uses the Bootstrap JavaScript Library when generating the HTML page.

#!ring -cgi
Load "weblib.ring"
Import System.Web

Func Main
  new BootstrapPage {
        divstart([ :class = "container" ])
           divstart([ :class = "jumbotron"  ])
                h1("Bootstrap Page")
          divend()
          divstart([ :class = :row ])
                divstart([ :class = "col-sm-4" ])
                  h3("Welcome to the Ring programming language")
                  p([ :text = "Using a scripting language is very fun!" ])
                divend()
                divstart([ :class = "col-sm-4" ])
                  h3("Welcome to the Ring programming language")
                  p([ :text = "using a scripting language is very fun!" ])
                divend()
                divstart([ :class = "col-sm-4" ])
                  h3("Welcome to the Ring programming language")
                  p([ :text = "using a scripting language is very fun!" ])
                divend()
          divend()
        divend()
  }

Screen Shot:

Using Bootstrap Library using Objects¶

The next example uses the Bootstrap JavaScript Library when generating the HTML page.

Instead of using functions to generate the HTML elements, we will use objects.

#!ring -cgi
Load "weblib.ring"
Import System.Web

Func Main
  BootStrapWebPage()
  {
        div
        {
          classname = :container
          div
          {
                classname = :jumbotron
                H1 {   text("Bootstrap Page")   }
          }
          div
          {
                classname = :row
                for x = 1 to 3
                  div
                  {
                        classname = "col-sm-4"
                        H3 { html("Welcome to the Ring programming language") }
                        P  { html("Using a scripting language is very fun!") }
                  }
                next
          }
          div
          {
                classname = :row
                div
                {
                  classname = "col-sm-4"
                  Button
                  {
                        classname = "btn btn-info btn-lg"
                        datatoggle= "modal"
                        datatarget = "#myModal"
                        text("Open Large Modal")
                  }
                }
                div
                {
                  classname = "col-sm-4"
                  Button {  classname = "btn btn-default btn-lg" text("default") }
                  Button {  classname = "btn btn-primary btn-md" text("primary") }
                  Button {  classname = "btn btn-success btn-sm" text("success") }
                  Button {  classname = "btn btn-info btn-xs"    text("info") }
                  Button {  classname = "btn btn-warning"        text("warning") }
                  Button {  classname = "btn btn-danger"         text("danger") }
                  Button {  classname = "btn btn-link"           text("link") }
                }
                div
                {
                  classname = "col-sm-4"
                  Button {  classname = "btn btn-default btn-block" text("default") }
                  Button {  classname = "btn btn-primary btn-block" text("primary") }
                  Button {  classname = "btn btn-success btn-block" text("success") }
                  Button {  classname = "btn btn-info btn-block"    text("info") }
                  Button {  classname = "btn btn-warning btn-block" text("warning") }
                  Button {  classname = "btn btn-danger btn-block"  text("danger") }
                  Button {  classname = "btn btn-link btn-block"    text("link") }
                }
                div
                {
                  classname = "col-sm-4"
                  div { classname = "btn-group"
                        button {  classname="btn btn-primary" text("one") }
                        button {  classname="btn btn-primary" text("two") }
                        button {  classname="btn btn-primary" text("three") }
                  }
                }
                div
                {
                  classname = "col-sm-4"
                  div { classname = "btn-group btn-group-lg"
                        button {  classname="btn btn-primary" text("one") }
                        button {  classname="btn btn-primary" text("two") }
                        button {  classname="btn btn-primary" text("three") }
                  }
                }
                div
                {
                  classname = "col-sm-4"
                  div {
                        classname = "btn-group-vertical btn-group-lg"
                        button {  classname="btn btn-primary" text("one") }
                        button {  classname="btn btn-primary" text("two") }
                        button {  classname="btn btn-primary" text("three") }
                  }
                }
          }
          div { classname="modal fade" id="myModal" role="dialog"
                div { classname = "modal-dialog modal-lg"
                  div { classname="modal-content"
                        div { classname="modal-header"
                          button {  classname="close" datadismiss="modal"
                                html("&times")
                          }
                          h4 {  classname="modal-title"
                                text("Modal Header")
                          }
                        }
                        div { classname = "modal-body"
                          p { text("This is a large model.") }
                        }
                        div { classname="modal-footer"
                          button { classname = "btn btn-default" datadismiss="modal"
                                text("close")
                          }
                        }
                  }
                }
          }
        }
  }

Screen Shot:

CRUD Example using MVC¶

The next example uses the weblib.ring & datalib.ring.

The datalib.ring contains classes for creating database applications using MVC pattern.

In this example we create an object from the SalaryController class then call the Routing method.

We define the website variable to contains the basic url of the page.

When we create the SalaryModel class from the ModelBase class, the salary table will be opened and the columns data will be defined as attributes in the model class.

The SalaryView class create an object from the SalaryLanguageEnglish class to be used for translation.

The method AddFuncScript is used to call the form for adding/modifying record data.

The method FormViewContent is used to determine the controls in the form when we add or modify a record.

#!ring -cgi
Load "weblib.ring"
Load "datalib.ring"
Import System.Web

website = "ex24.ring"

New SalaryController { Routing() }

Class SalaryModel from ModelBase

Class SalaryController From ControllerBase

Class SalaryView From ViewBase

  oLanguage = new SalaryLanguageEnglish

  Func AddFuncScript oPage,oController
        return   oPage.scriptfuncajax("myadd",oController.cMainURL+
                 oController.cOperation+"=add","mysubpage")

  Func FormViewContent oController,oTranslation,oPage
        return [
                        [ oTranslation.aColumnsTitles[2], "textbox", "name",
                          oController.oModel.Name, oPage.stylewidth("100%")    ],
                        [ oTranslation.aColumnsTitles[3], "textbox", "salary",
                          oController.oModel.Salary, oPage.stylewidth("50%") ]
                   ]

Class SalaryLanguageEnglish
  cTitle = "Salary Table"
  cBack = "back"
  aColumnsTitles = ["ID","Name","Salary"]
  cOptions = "Options"
  cSearch = "Search"
  comboitems = ["Select Option...","Edit","Delete"]
  cAddRecord = "Add Record"
  cEditRecord = "Edit Record"
  cRecordDeleted = "Record Deleted!"
  aMovePages = ["First","Prev","Next","Last"]
  cPage = "Page"
  cOf = "of"
  cRecordsCount = "Records Count"
  cSave = "Save"
  temp = new page
  cTextAlign = temp.StyleTextRight()
  cNoRecords = "No records!"

Screen Shot:

Users registration and Login¶

We have the users classes (Model, View & Controller) to deal with the users data like username & email.

The next code is stored in ex25_users.ring

Class UsersModel from ModelBase
  cSearchColumn = "username"

Class UsersController From ControllerBase
  aColumnsNames = ["id","username","email"]

  Func UpdateRecord
        oModel.id = aPageVars[cRecID]
        oModel.updatecolumn("username", aPageVars[:username] )
        oModel.updatecolumn("email", aPageVars[:email] )
        oView.UpdateView(self)

Class UsersView from ViewBase

  oLanguage = new UsersLanguageEnglish

  Func AddFuncScript oPage,oController
        return   oPage.scriptfunc("myadd",oPage.scriptredirection("ex26.ring"))

  Func FormViewContent oController,oTranslation,oPage
        return [
                        [oTranslation.aColumnsTitles[2],"textbox","username",
                        oController.oModel.UserName,oPage.stylewidth("100%")],
                        [oTranslation.aColumnsTitles[3],"textbox","email",
                        oController.oModel.Email,oPage.stylewidth("50%")]
                   ]

Class UsersLanguageEnglish
  cTitle = "Users Table"
  cBack = "back"
  aColumnsTitles = ["ID","User Name","Email"]
  cOptions = "Options"
  cSearch = "Search"
  comboitems = ["Select Option...","Edit","Delete"]
  cAddRecord = "Add Record"
  cEditRecord = "Edit Record"
  cRecordDeleted = "Record Deleted!"
  aMovePages = ["First","Prev","Next","Last"]
  cPage = "Page"
  cOf = "of"
  cRecordsCount = "Records Count"
  cSave = "Save"
  temp = new page
  cTextAlign = temp.StyleTextRight()
  cNoRecords = "No records!"

In the file ex25.ring we load ex25_users.ring then create an object from UsersController class.

Using the created object, we call the routing method.

#!ring -cgi
Load "weblib.ring"
Load "datalib.ring"
Load "ex25_users.ring"

Import System.Web
website = "ex25.ring"
New UsersController { Routing() }

Screen Shot:

See the next code for the registration page

#!ring -cgi
Load "weblib.ring"
Load "datalib.ring"
Import System.Web

website = "ex26.ring"

new page {
  boxstart()
        text( "Register")
        newline()
  boxend()
  divstart([:style = stylegradient(6) + stylesize("100%","95%") ])
  link([ :url = website, :title = "back" , :style = stylecolor("white")])
  newline()
  divstart([ :style= styledivcenter("500","160") + stylegradient(52) ])
  formpost("ex27.ring")
        tablestart([ :Style =    stylemarginleft("2%") + stylemargintop("2%") +
                                 stylewidth("90%") ])
          rowstart([])
                cellstart([:style = stylewidth("20%") + styleheight(30)])
                  text("User Name")
                cellend()
                cellstart([ :style = stylewidth("80%")  ])
                  textbox([:name = "username", :style = stylewidth("100%")])
                cellend()
          rowend()
          rowstart([])
                cellstart([ :Style = styleheight(30)])
                  text("Password")
                cellend()
                cellstart([])
                  textbox([:name = "password" , :type = "password"])
                cellend()
          rowend()
          rowstart([])
                cellstart([ :style = styleheight(30)])
                  text("Email")
                cellend()
                cellstart([])
                  textbox([:name = "email" , :style = stylewidth("100%")])
                cellend()
          rowend()
          rowstart([])
                cellstart([ :style = styleheight(30)])
                cellend()
                cellstart([ :style = styleheight(30)])
                  submit([:value = "Register"  ])
                cellend()
          rowend()
        tableend()
  formend()
  divend()
  divend()
}

Screen Shot:

The Registration response

#!ring -cgi
Load "weblib.ring"
Load "datalib.ring"
Load "ex25_users.ring"

Import System.Web

oUser = new UsersModel
oUser.Connect()
if oUser.findwith("username",aPageVars["username"])
        new page {
                text("The user name is already registered")
        }
        return
ok
if oUser.findwith("email",aPageVars["email"])
        new page {
                text("This email is already registered")
        }
        return
ok

aPageVars["salt"] = str2hex(RandBytes(32))
aPageVars["pwhash"] = sha256(aPagevars["password"]+aPageVars["salt"])
aPageVars["sessionid"] = str2hex(randbytes(32))
oUser.Insert()
new page {
        cookie("sessionid",aPageVars["sessionid"])
        text("New User Created!")
        newline()
        text("User Name : " + aPageVars["username"])
        newline()
}
oUser.Disconnect()

See the next code for the Login page

#!ring -cgi
Load "weblib.ring"
Load "datalib.ring"

Import System.Web

website = "ex28.ring"

new page {
  boxstart()
        text( "Login")
        newline()
  boxend()
  divstart([:style = stylegradient(6) + stylesize("100%","95%") ])
  link([ :url = website, :title = "back" , :style = stylecolor("white")])
  newline()
  divstart([ :style= styledivcenter("500","130") + stylegradient(52) ])
  formpost("ex29.ring")
        tablestart([ :Style =   stylemarginleft("2%") + stylemargintop("2%") +
                                stylewidth("90%") ])
          rowstart([])
                cellstart([:style = stylewidth("20%") + styleheight(30)])
                  text("User Name")
                cellend()
                cellstart([ :style = stylewidth("80%") ])
                  textbox([:name = "username", :style = stylewidth("100%")])
                cellend()
          rowend()
          rowstart([])
                cellstart([ :style = styleheight(30)])
                  text("Password")
                cellend()
                cellstart([])
                  textbox([:name = "password" , :type = "password"])
                cellend()
          rowend()
          rowstart([])
                cellstart([ :style = styleheight(30) ])
                cellend()
                cellstart([])
                  submit([:value = "Login"  ])
                cellend()
          rowend()
        tableend()
  formend()
  divend()
  divend()
}

Screen Shot:

The response page

#!ring -cgi
Load "weblib.ring"
Load "datalib.ring"
Load "ex25_users.ring"

Import System.Web

oUser = new UsersModel
oUser.Connect()
lResult = oUser.FindWith("username",aPageVars["username"])
new page {
        if lResult
                if sha256(aPagevars["password"]+oUser.Salt) = oUser.pwhash
                        text ("Correct Password!")
                        aPageVars["sessionid"] = str2hex(randbytes(32))
                        oUser.UpdateColumn("sessionid",aPageVars["sessionid"])
                        cookie("sessionid",aPageVars["sessionid"])
                else
                        text ("Bad password!")
                ok
        else
                text("Bad User Name!")
        ok
}
oUser.Disconnect()

The next code for checking if the user needs to login or not

#!ring -cgi
Load "weblib.ring"
Load "datalib.ring"
Load "ex25_users.ring"

Import System.Web

oUser = new UsersModel
oUser.Connect()
lResult = oUser.FindWith("sessionid",aPageVars["sessionid"])
new page {
        if lResult
                text("User Name : " + oUser.username )
        else
                text("Please Login First!")
        ok
}
oUser.Disconnect()

Database, ModelBase & ControllerBase classes¶

In this section we will see some code from datalib.ring

The next code presents the Database, ModelBase & ControllerBase classes

Import System.Web

Class Database

  cServer = "localhost"
  cUserName = "root"
  cPassword = "root"
  cDatabase = "mahdb"

  Func Connect

        con = mysql_init()
        mysql_connect(con, cServer, cUserName, cPassWord,cDatabase)

  Func Disconnect

        mysql_close(con)

  Func Query cQuery

        mysql_query(con,cQuery)

  Func QueryResult

        return mysql_result(con)

  Func QueryResultWithColumns
        # return columns names + query result
        return mysql_result2(con)

  Func QueryValue
        aResult = mysql_result(con)
        if islist(aResult) and len(aResult) >= 1
          aResult = aResult[1]
          if len(aResult) >= 1
                return aResult[1]
          ok
        ok
        return 0

  Func EscapeString x
        if isstring(x)
          return MySQL_Escape_String(con,x)
        else
          return MySQL_Escape_String(con,string(x))
        ok

  Private
        con = NULL

Class ModelBase from Database

  cTableName = ""
  cSearchColumn = "name"
  aColumns = []
  aQueryResult = []
  ID = 0

  # set table name from class name
  classname = lower(classname(self))
  if right(classname,5) = :model
        cTablename = left(classname,len(classname)-5)
  ok

  Func Insert

        cValues = ""
        for x in aColumns
          cValues += "'" + EscapeString(aPageVars[x]) + "',"
        Next
        cValues = left(cValues,len(cValues)-1)  # remove last comma
        cColumns = ""
        for x in aColumns
          cColumns += x + ","
        next
        cColumns = left(cColumns,len(cColumns)-1)
        query("insert into " + cTableName + "("+cColumns+") values (" +
                 cValues + ")" )

  Func Update nID

        cStr = ""
        for x in aColumns
          cStr += x + " = '" + EscapeString(aPageVars[x]) + "' , "
        # the space after comma is necessary
        Next
        cStr = left(cStr,len(cStr)-2)
        query("update " + cTableName + " set " + cStr + " where id = " + nID )

  Func UpdateColumn cColumn,cValue
        query("update " + cTableName + " set " + cColumn + " = '" +
        EscapeString(cValue) + "' where id = " + self.ID )


  Func Count cValue

        query("SELECT count(*) FROM " + cTableName +
                 " where "+cSearchColumn+" like '" + EscapeString(cValue) + "%'")
        return queryValue()

  Func Read nStart,nRecordsPerPage

        query("SELECT * FROM "+ cTableName+" limit " + EscapeString(nStart) + "," +
        EscapeString(nRecordsPerPage) )
        aQueryResult = queryResult()

  Func Search cValue,nStart,nRecordsPerPage

        query("SELECT * FROM "+ cTableName+" where "+cSearchColumn+" like '" +
        EscapeString(cValue) + "%'" +
          " limit " + EscapeString(nStart) + "," + EscapeString(nRecordsPerPage) )
        aQueryResult = queryResult()

  Func Find nID

        query("select * from " + cTableName + " where id = " + EscapeString(nID) )
        aResult = queryResult()[1]
        # move the result from the array to the object attributes
        ID = nID
        cCode = ""
        for x = 2 to len(aResult)
          cCode += aColumns[x-1] + " = hex2str('" + str2hex(aResult[x]) + "')" + nl
        next
        eval(cCode)

  Func FindWith cColumn,cValue

        query("select * from " + cTableName + " where "+cColumn+" = '" +
        EscapeString(cValue) + "'" )
        aResult = queryResult()
        if len(aResult) > 0
          aResult = aResult[1]
        else
          return 0
        ok
        # move the result from the array to the object attributes
        ID = aResult[1]
        cCode = ""
        for x = 2 to len(aResult)
          cCode += aColumns[x-1] + " = hex2str('" + str2hex(aResult[x]) + "')" + nl
        next
        eval(cCode)
        return 1

  Func Delete ID

        query("delete from " + cTableName + " where id = " + EscapeString(ID) )

  Func Clear

        cCode = ""
        for x in aColumns
          cCode += x + ' = ""' + nl
        next
        eval(cCode)

  Func LoadModel

        # create the columns array
        query("SELECT * FROM "+ cTableName + " limit 0,1")
        aQueryResult = QueryResultWithColumns()[1]
        for x = 2 to len(aQueryResult)
          aColumns + lower(trim(aQueryResult[x]))
        next

        # create attribute for each column
        for x in aColumns
          addattribute(self,x)
        next

  Func Connect

        Super.Connect()
        if nLoadModel = 0
          nLoadModel = 1
          LoadModel()
        ok

  private

        nLoadModel = 0


Class ControllerBase

  nRecordsPerPage = 5
  nRecordsCount = 0
  nPagesCount = 0
  nActivePage = 0

  # Dynamic creation of oView = new tablenameView and oModel = new tablename.Model
  classname = lower(classname(self))
  if right(classname,10)  = :controller
        tablename = left(classname,len(classname)-10)
        cCode = "oView = new " + tablename+"View" + nl
        cCode += "oModel = new " + tablename+"Model" + nl
        eval(cCode)
        oModel.connect()
  ok

  cSearchName = "searchname"
  cPart = "part"
  cPageError = "The page number is not correct"
  cLast = "last"
  cOperation = "operation"
  cRecID = "recid"

  aColumnsNames = ["id"]
  for t in oModel.aColumns
        aColumnsNames + t
  next

  cMainURL = website + "?"

  func Routing

        switch      aPageVars[cOperation]
        on NULL     showtable()
        on :add     addrecord()
        on :save    saverecord()
        on :delete  deleterecord()
        on :edit    editrecord()
        on :update  updaterecord()
        off

  func ShowTable

        nRecordsCount = oModel.Count( aPageVars[cSearchName] )

        nPagesCount = ceil(nRecordsCount / nRecordsPerPage)

        if aPageVars[cPart] = cLast
          aPageVars[cPart] = string(nPagesCount)
        ok

        nActivePage = number(aPageVars[cPart])
        if nActivePage = 0 nActivePage = 1 ok

        if ( nActivePage > nPagesCount ) and nRecordsCount > 0
          ErrorMsg(cPageError)
          return
        ok

        nStart = (nActivePage-1)*nRecordsPerPage

        if aPageVars[cSearchName] = NULL
          oModel.Read( nStart,nRecordsPerPage )
        else
          oModel.Search( aPageVars[cSearchName],nStart,nRecordsPerPage )
        ok

        oView.GridView(self)

  func AddRecord

        oModel.clear()
        oView.FormViewAdd(Self,:save,false) # false mean don't include record id

  func SaveRecord

        oModel.Insert()
        oView.SaveView(self)

  func EditRecord

        oModel.Find( aPageVars[cRecID] )
        oView.FormViewEdit(Self,:update,true) # true mean include record id

  func UpdateRecord

        oModel.update( aPageVars[cRecID] )
        oView.UpdateView(self)

  func DeleteRecord

        oModel.Delete( aPageVars[cRecID] )
        oView.DeleteView()

  func braceend

        oModel.Disconnect()

WebLib API¶

In this section we will see the web library functions, classes and methods.

Function	Parameters	Description
LoadVars	None	Save the request parameters and cookies to aPageVars List
WebPage	None	Create new object from the WebPage Class
BootStrapWebPage	None	Create new object from the BootStrapWebPage Class
HTMLSpecialChars	cString	Encode Special characters to HTML equivalent
Template	cFile,oObject	Execute Ring Code in cFile after accessing oObject using {}
Alert	cMessage	Generate HTML Web Page that display cMessage using JavaScript Alert()
HTML2PDF	cString	Generate and Display PDF File from HTML String (cString)

The Package System.Web contains the next classes

Class Name	Description
Application	Contains methods for Encoding, Decoding, Cookies & More.
Page	Contains methods to generate HTML pages.
ScriptFunctions	Contains methods to generate some JavaScript Functions.
StyleFunctions	Contains methods to generate CSS.
PageBuffer	Generate HTML Page in memory (don’t print the output).
HTML2PDF	Generate PDF File from HTML code.
BootStrapPage	Using BootStrap Library.
WebPage	Generate page using objects for each element.
HtmlPage	Like WebPage but doesn’t print the output to stdout.
BootStrapWebPage	Generate page using objects, using BootStrap Library.
ObjsBase	Parent Class for page objects.
NewObjectsFunctions	Methods to create new objects in the page or element.
H1	Wraps HTML H1.
H2	Wraps HTML H2.
H3	Wraps HTML H3.
H4	Wraps HTML H4.
H5	Wraps HTML H5.
H6	Wraps HTML H6.
P	Wraps HTML P.
Link	Wraps HTML link.
NewLine	Wraps HTML NewLine.
Div	Wraps HTML Div.
Form	Wraps HTML Form.
Input	Wraps HTML Input.
TextArea	Wraps HTML TextArea.
Select	Wraps HTML Select.
Option	Wraps HTML Option.
Image	Wraps HTML Image.
UL	Wraps HTML UL.
LI	Wraps HTML LI.
Table	Wraps HTML Table.
TR	Wraps HTML TR.
TD	Wraps HTML TD.
TH	Wraps HTML TH.
Audio	Wraps HTML Audio.
Video	Wraps HTML Video.
Nav	Wraps HTML Nav.
Span	Wraps HTML Span.
Button	Wraps HTML Button.

Application Class¶

Method	Parameters	Description
DecodeString	cString	Decode request parameters
Decode	cString	Decode multipart/form-data
GetFileName	aArray,cVar	Get File Name in aArray using cVar
SetCookie	name,value,expires,path,domain,secure	Set Cookie
Cookie	name,value	Set Cookie using name and value only
GetCookies	None	Get Cookies
URLEncode	cString	URL Encode
ScriptLibs	None	Add JavaScript Libraries like BootStrap
Print	None	Print Page Content
Style	cStyle	Add cStyle to page CSS content
StartHTML	None	Add HTTP Header to page content

The method DecodeString is used to get HTTP request parameters.

The methods Decode and GetFileName are used for uploading files.

The methods SetCookie, Cookie & GetCookies are used for adding and reading cookies.

The methods StartHTML, ScriptsLibs, Style & Print are used for page structure and JS/CSS support.

The method URLEncode is used to encode a URL to be used in HTML pages.

Page Class¶

Method	Parameters	Description
text	x	add HTMLSpecialChars(x) to page content (accept strings and numbers)
html	cString	add html code to page content
h1	x	add x to page content between <h1> and </h1>
h2	x	add x to page content between <h2> and </h2>
h3	x	add x to page content between <h3> and </h3>
h4	x	add x to page content between <h4> and </h4>
h5	x	add x to page content between <h5> and </h5>
h6	x	add x to page content between <h6> and </h6>
p	aPara	HTML <p> </p>, uses aPara List as Hash to get attributes
NewLine	None	add <br /> to page content
AddAttributes	aPara	Convert aPara list as hash to HTML element attributes
Link	aPara	HTML <a href> and </a>, uses aPara List as Hash to get attributes
Image	aPara	HTML <img>, uses aPara List as Hash to get attributes
Button	aPara	HTML <input type=”button”>, uses aPara List as Hash to get attributes
ButtonLink	aPara	HTML <input type=”button”>, uses link attribute to navigate to link
Textbox	aPara	HTML <input type=”text”>, uses aPara List as Hash to get attributes
Editbox	aPara	HTML <textarea> and </textarea>, uses aPara to get attributes
Combobox	aPara	HTML <select>, uses items attribute as list for <option>
Listbox	aPara	HTML <select multiple=’multiple’>, uses items attribute for <option>
ulstart	aPara	HTML <ul>
ulend	aPara	HTML </ul>
listart	aPara	HTML <li>
liend	aPara	HTML </li>
List2UL	aList	Generate HTML <ul> including items from Ring List items
DivStart	aPara	HTML <div>, uses aPara List as Hash to get attributes
NavStart	aPara	HTML <nav>, uses aPara List as Hash to get attributes
SpanStart	aPara	HTML <span>, uses aPara List as Hash to get attributes
BoxStart	None	Generate Div with black background to be used as page header
DivEnd	None	HTML </div>
NavEnd	None	HTML </nav>
SpanEnd	None	HTML </span>
BoxEnd	None	HTML </div>, the same as divend()
FormStart	cAction	HTML <form>, with cAction as the action attribute or an empty value
FormPost	cAction	HTML <form method=”post”> , with cAction as the action attribute
FormEnd	None	HTML </form>
Submit	aPara	HTML <input type=”submit”>
Hidden	cName,cValue	HTML <input type=”hidden”>
FormUpload	x	HTML Form, method=”post” enctype=”multipart/form-data” and x = action
UploadFile	x	HTML <input type=”file”> and name = x
Video	aPara	HTML <video>
Audio	aPara	HTML <audio>
GetColor	aPara	Select Color
Radio	aPara	HTML <input type=”radio”>
Checkbox	aPara	HTML <input type=”checkbox”>
Spinner	aPara	HTML <input type=”number”>
Slider	aPara	HTML <input type=”range”>
TableStart	aPara	HTML <table>
TableEnd	None	HTML </table>
RowStart	aPara	HTML <tr>
RowEnd	None	HTML </tr>
CellStart	aPara	HTML <td>
CellEnd	None	HTML </td>
HeaderStart	aPara	HTML <th>
HeaderEnd	None	HTML </th>

aPara in the page methods is a list contains attributes and values. Using aPara we can set values for the next attributes

classname id name align style dir value onclick oncontextmenu ondblclick
onmousedown onmouseenter onmouseleave onmousemove onmouseover onmouseout
onmouseup onkeydown onkeypress onkeyup onabort onbeforeunload onerror
onhashchange onload onpageshow onpagehide onresize onscroll onunload
onblur onchange onfocus onfocusin onfocusout oninput oninvalid onreset
onsearch onselect onsubmit ondrag ondragend ondragenter ondragleave
ondragover ondragstart ondrop oncopy oncut onpaste onafterprint
onbeforeprint oncanplay oncanplaythrough ondurationchange onemptied
onended onloadeddata onloadedmetadata onloadstart onpause onplay
onplaying onprogress onratechange onseeked onseeking onstalled onsuspend
ontimeupdate onvolumechange onwaiting animationend animationiteration
animationstart transitionend onmessage onopen onmousewheel ononline
onoffline onpostate onshow onstorage ontoggle onwheel ontouchcancel
ontouchend ontouchmove ontouchstart color opacity background backgroundattachment
backgroundcolor backgroundimage backgroundposition backgroundrepeat backgroundclip
backgroundorigin backgroundsize border borderbottom borderbottomcolor
borderbottomleftradius borderbottomrightradius borderbottomstyle borderbottomwidth
bordercolor borderimage borderimageoutset borderimagerepeat borderimageslice
borderimagesource borderimagewidth borderleft borderleftcolor borderleftstyle
borderleftwidth borderradius borderright  borderrightcolor borderrightstyle
borderrightwidth borderstyle bordertop bordertopcolor bordertopleftradius
bordertoprightradius bordertopstyle bordertopwidth borderwidth boxdecorationbreak
boxshadow bottom clear clip display float height left margin marginbottom marginleft
marginright margintop maxheight maxwidth minheight minwidth overflow overflowx
overflowy padding paddingbottom paddingleft paddingright paddingtop position
right top visibility width verticalalign zindex aligncontent alignitems alignself
flex flexbasis flexdirection flexflow flexgrow flexshrink flexwrap justifycontent
order hangingpunctuation hyphens letterspacing linebreak lineheight overflowwrap
tabsize textalign textalignlast textcombineupright textindent textjustify
texttransform whitespace wordbreak wordspacing wordwrap textdecoration
textdecorationcolor textdecorationline textdecorationstyle textshadow
textunderlineposition @fontface @fontfeaturevalues font fontfamily fontfeaturesettings
fontkerning fontlanguageoverride fontsize fontsizeadjust fontstretch fontstyle
fontsynthesis fontvariant fontvariantalternates fontvariantcaps fontvarianteastasian
fontvariantligatures fontvariantnumeric fontvariantposition fontweight direction
textorientation unicodebidi writingmode bordercollapse borderspacing captionside
emptycells tablelayout counterincrement counterreset liststyle liststyleimage
liststyleposition liststyletype @keyframes animation animationdelay animationdirection
animationduration animationfillmode animationiterationcount animationname
animationplaystate animationtimingfunction backfacevisibility perspective
perspectiveorigin transform transformorigin transformstyle transition
transitionproperty transitionduration transitiontimingfunction transitiondelay
boxsizing content cursor imemode navdown navindex navleft navright navup
outline outlinecolor outlineoffset outlinestyle outlinewidth resize textoverflow
breakafter breakbefore breakinside columncount columnfill columngap columnrule
columnrulecolor columnrulestyle columnrulewidth columnspan columnwidth columns
widows orphans pagebreakafter pagebreakbefore pagebreakinside marks quotes
filter imageorientation imagerendering imageresolution objectfit objectposition
mask masktype mark markafter markbefore phonemes rest restafter restbefore
voicebalance voiceduration voicepitch voicepitchrange voicerate voicestress
voicevolume marqueedirection marqueeplaycount marqueespeed marqueestyle datatoggle
dataride datatarget dataslideto dataslide datadismiss dataplacement datacontent
datatrigger dataspy dataoffset dataoffsettop

ScriptFunctions Class¶

This class contains methods for adding JavaScript code to the generated web page.

The class methods are merged to the Page class, so we can use the next methods with page objects directly.

Method	Parameters	Description
Script	cCode	Add cCode string between <script> and </script>
ScriptRedirection	cURL	set window.location to cURL
ScriptFunc	cFuncName,cCode	Define function cFuncName that contains cCode
ScriptFuncAlert	cFuncName,cMsg	Define function cFuncName that uses alert() to print cMsg
ScriptFuncAjax	cFuncName,cLink,cDiv	Define function cFuncName that load cLink in cDiv
ScriptFuncClean	cFuncName,cDiv	Define function cFuncName that clear the cDiv
ScriptFuncSelect	cF,aL,cD,cR,cGR,cFC,nTO,cL1,cL2	Used to Edit/Delete Grid Record
ScriptScrollFixed	cDiv,nSize	Set cDiv as Fixed Div with Size = nSize

StyleFunctions Class¶

This class contains methods for adding CSS to the generated web page.

Like ScriptFunctions Class, The StyleFunctions class methods are merged to the Page class, so we can use the next methods with page objects directly.

Method	Parameters	Description
StyleFloatLeft	None	Return float: left ;
StyleFloatRight	None	Return float: right ;
StyleSizeFull	None	Return width: 100% ; height: 100% ;
Stylecolor	x	Return ” color: ” + x + ” ; “
Stylebackcolor	x	Return ” background-color: ” + x + ” ;”
StyleTextCenter	None	Return “text-align: center ;”
StyleTextRight	None	Return “text-align: right ;”
StyleTextLeft	None	Return “text-align: left ;”
StyleSize	x,y	Return ” width: ” + x + ” ; height: ” + y + ” ;”
StyleWidth	x	Return ” width: ” + x + ” ;”
StyleHeight	x	Return ” height: ” + x + ” ;”
StyleTop	x	Return ” top: ” + x + ” ;”
StyleLeft	x	Return ” Left: ” + x + ” ;”
StylePos	x,y	Return ” top: ” + x + ” ;” + ” Left: ” + y + ” ;”
StyleHorizontalCenter	None	Return ” margin-right:auto ; margin-left:auto; “
StyleMarginTop	x	Return ” margin-top: ” + x + ” ;”
StyleMarginRight	x	Return ” margin-right: ” + x + ” ;”
StyleMarginLeft	x	Return ” margin-left: ” + x + ” ;”
StyleDivCenter	nWidth,nHeight	Create Div in the center of the page
StyleAbsolute	None	Return ” position:absolute ;”
StyleFixed	None	Return ” position:fixed ;”
StyleZIndex	x	Return ” z-index: ” + x + ” ;”
StyleFontSize	x	Return ” font-size: ” + x + ” ;”
StyleGradient	x	Generate Gradient (x values from 1 to 60)
StyleTable	None	Set table properties
StyleTableRows	id	Set different color to even and odd rows in the table
StyleTableNoBorder	None	Return ” border-style: none;”

WebPage Class¶

We use braces to access the active WebPage object attributes

Each one of these attribute will return a new object to access again using braces.

Attribute	Description
H1	Wraps HTML H1.
H2	Wraps HTML H2.
H3	Wraps HTML H3.
H4	Wraps HTML H4.
H5	Wraps HTML H5.
H6	Wraps HTML H6.
P	Wraps HTML P.
Link	Wraps HTML link.
NewLine	Wraps HTML NewLine.
Div	Wraps HTML Div.
Form	Wraps HTML Form.
Input	Wraps HTML Input.
TextArea	Wraps HTML TextArea.
Select	Wraps HTML Select.
Option	Wraps HTML Option.
Image	Wraps HTML Image.
UL	Wraps HTML UL.
LI	Wraps HTML LI.
Table	Wraps HTML Table.
TR	Wraps HTML TR.
TD	Wraps HTML TD.
TH	Wraps HTML TH.
Audio	Wraps HTML Audio.
Video	Wraps HTML Video.
Nav	Wraps HTML Nav.
Span	Wraps HTML Span.
Button	Wraps HTML Button.

HtmlPage Class¶

The same as the WebPage class with the next changes

No output to the stdout
Provide the Output Method to get the output

Syntax:

output() ---> The output as string